| |
| DESCRIPTION |
|
 |
| WallGuard is a clear matte finish. It is intended as a protective finish coat
for ourWallShield elastomeric coating. |
| |
|
| USES |
|
| Clear matte finish coat to help keep ourWallShield elastomeric coating clean longer. Can
also be used on masonry, concrete and other mechanically sound surfaces where a high
gloss is desired.. |
| |
|
| FEATURES & BENEFITS |
|
- Tough, durable, UV resistant protective sealant.
- Excellent water resistance.
- Good bridging qualities over hairline cracks and small openings..
- Excellent adhesion and binding qualities.
- Outstanding resistance to dirt collection and pollutants.
- Brings out and heightens the natural color of stone or brick.
- Environmentally safe.
- Easy to use, easy clean up, non-toxic and VOC compliant water based coating.
|
| |
|
|
| PREPARATION |
|
|
| All surfaces to be coated must be clean, dry and free of any oil, grease or
dirt. High pressure water washing is recommended. Any existing coating
must be checked for good adhesion. Before application, any loosely adhered
coating must be removed and bare surfaces must be prepared, cleaned and
checked for ompatibility. |
|
| |
| APPLICATION |
| WallGuard is ready to use. Thinning is not required or recommended. |
- Spray: Airless sprayer. 1/2 g.p.m. capacity with a #517 tip.
- Brush: Good quality synthetic bristle brush.
- Roller: Short nap roller.
|
|
|
